ubobuntu hdmi audio not working

Discussion in 'Troubleshooting' started by bert_harbinson, Jun 15, 2014.

Thread Status:
Not open for further replies.
  1. bert_harbinson

    bert_harbinson New Member

    Joined:
    May 31, 2014
    Messages:
    5
    Likes Received:
    0
    I can not get audio working over hdmi with the udubuntu image, on an udoo quad.

    aplay -L

    lists the device

    default
    Playback/recording through the PulseAudio sound server
    sysdefault:CARD=vt1613audio
    vt1613-audio,
    Default Audio Device
    dmix:CARD=vt1613audio,DEV=0
    vt1613-audio,
    Direct sample mixing device
    dsnoop:CARD=vt1613audio,DEV=0
    vt1613-audio,
    Direct sample snooping device
    hw:CARD=vt1613audio,DEV=0
    vt1613-audio,
    Direct hardware device without any conversions
    plughw:CARD=vt1613audio,DEV=0
    vt1613-audio,
    Hardware device with all software conversions
    sysdefault:CARD=imxhdmisoc
    imx-hdmi-soc,
    Default Audio Device
    dmix:CARD=imxhdmisoc,DEV=0
    imx-hdmi-soc,
    Direct sample mixing device
    dsnoop:CARD=imxhdmisoc,DEV=0
    imx-hdmi-soc,
    Direct sample snooping device
    hw:CARD=imxhdmisoc,DEV=0
    imx-hdmi-soc,
    Direct hardware device without any conversions
    plughw:CARD=imxhdmisoc,DEV=0
    imx-hdmi-soc,
    Hardware device with all software conversions

    running speaker-test sending noise to hdmi seems to be working fine (no errors in terminal), still no audible output over hdmi. Always working over headphone output.
    Hdmi device is tested and working with other source.

    on the gui program "volume control" I can not change it.

    any suggestions?
     

    Attached Files:

  2. bert_harbinson

    bert_harbinson New Member

    Joined:
    May 31, 2014
    Messages:
    5
    Likes Received:
    0
    After using a fresh image it worked right away...
     
  3. delba

    delba Administrator Staff Member

    Joined:
    May 8, 2013
    Messages:
    1,064
    Likes Received:
    9
    Good. I'm closing the thread then.
     
Thread Status:
Not open for further replies.

Share This Page