Hi, After I pull out a USB mouse while the UDOO was running, the ports do not work anymore. The mouse and keyboard are not detected by the UDOO. Before I disconnected it everything was working well. Someone an idea what I destroyed and how I can fix it? thank a lot
probably a dumb question but... have you powered down and up again your UDOO? anyway try this: power down, disconnect keyboard and mouse, power up, wait for a complete boot sequence, then connect the keyboard and mouse. if still not working then connect a serial terminal via the USB CN6 port and check the dmesg log.
If after these good suggestions by @Pedro Ferreira you won't solve your problem contact the customer care and we'll take care of you
